Pool fencing across Wollondilly that meets NSW barrier law: correct height, self-closing gate and a clear non-climbable zone.
In New South Wales a pool barrier is a legal requirement, not a finishing touch, and every pool in Mount Hunter must be separated from the home and the street by a compliant fence. The governing standard is AS 1926.1, which sets a minimum barrier height of 1200mm, a maximum 100mm ground gap, vertical gaps no wider than 100mm, and a gate that is self-closing and self-latching from any open position. The latch must sit at least 1500mm above ground or be shielded, and a non-climbable zone of 900mm has to be kept clear inside the barrier so a child cannot use nearby objects, tap fittings or horizontal rails as a foothold. Material choice shapes the look: frameless glass keeps sightlines open across Wollondilly yards, semi-frameless glass balances cost and clarity, and tubular aluminium is the hardy, lower-priced option that suits sloping or exposed Sydney - South West blocks. Whatever the finish, the Pool Fencing & Safety Barriers has to satisfy the same dimensions, so the engineering of posts, spigots and footings is where compliance is won or lost. We measure the site, set out the barrier to clear pathways, windows, doors and boundaries, then install footings rated for the soil so glass spigots and aluminium posts stay rigid for years. Boundary fences that double as a pool barrier carry their own height and gap rules, and we account for those too. Once the fence is up we arrange the inspection and supply the certificate the Pool Fencing & Safety Barriers needs for the NSW Swimming Pools Register, the statewide record every pool in the state must be listed on before it is filled and used. The outcome for your Mount Hunter home is a barrier that looks the part and, more importantly, passes inspection and keeps children safe around the water.
Engineered, steel-reinforced concrete pools built to last for decades across Mount Hunter and the wider Wollondilly area.
Fast, low-maintenance fibreglass pools craned into place for Mount Hunter homes, and often swim-ready within one to two weeks.
Space-smart plunge pools for Mount Hunter, often fitted with swim jets, heating and built-in seating for year-round use.
Custom concrete lap pools sized to the exact length and width of your Wollondilly block and boundary.
Show-piece infinity pools for Mount Hunter, built with the precise catch-basin and level work that demands an experienced crew.
Small-footprint pools for compact inner-Wollondilly blocks, finished with water features, seating ledges, heating and lighting for a complete result.
Renovation that brings a dated, leaking or tired Mount Hunter pool back to life for far less than a full rebuild.
Refinish a rough or stained Mount Hunter pool, seal minor surface leaks and cut down on chemical use.